PP Base Filler
PE Base Filler
HDPE Base Filler
Talc Base Filler
Your Quality
is our Responsibility.
Every reason to make your product
into a quality product
Use it, feel it and enjoy
The Quality of Bajaj Masterbatches
PP Base Filler
PP BASE FILLER
PLAST STIFF
PLAST STIFF fillers are a perfect blend of ultra fine particle size Ca CO3 with Virgin Poly Propylene & performance additives at right proportions customized based on the end applications.
Plast Stiff improves strength, stiffness, modify physical & mechanical properties and reduces your processing and product cost. It is used only for PP based.
Plast Stiff improves strength, stiffness, modify physical & mechanical properties and reduces your processing and product cost. It is used only for PP based.
Types of PLAST STIFF
PLAST STIFF 780
Features:
- 1. Excellent anti-fibrillation
- 2. Less powder formation
- 3. Improves Dimensional Stability
- 4.Improves stiffness
- 5.Anti- slip property
Applications:
- Woven sacks
- Box strapping
- Inejection moulding
PLAST STIFF 783 PRM
Features:
- 1. Excellent anti-fibrillation
- 2. Less powder formation
- 3. Improves Dimensional Stability
- 4.Improves stiffness
- 5.Anti- slip property
Applications:
- Woven sacks
- Box strapping
- Inejection moulding
PLAST STIFF 783 HT SPIM
Features:
- 1. Excellent anti-fibrillation
- 2. Less powder formation
- 3. Improves Dimensional Stability
- 4.Improves stiffness
- 5.Anti- slip property
Applications:
- Woven sacks
- Box strapping
- Inejection moulding
PLAST STIFF 783 SUPER
Features:
- 1. Excellent anti-fibrillation
- 2. Less powder formation
- 3. Improves Dimensional Stability
- 4.Improves stiffness
- 5.Anti- slip property
Applications:
- Woven sacks
- Box strapping
- Inejection moulding
PP BASE FILLER
PLAST FAB
PLAST FAB fillers are a perfect blend of ultra fine particle size Ca CO3 with Virgin Poly Propylene & performance additives at right proportions customized based on the end applications.
It’s a special masterbatch for PP coating. It’s gives opacity and reduce the processing and cost.
It’s a special masterbatch for PP coating. It’s gives opacity and reduce the processing and cost.
Types of PLAST FAB
PLAST FAB 777
Features:
- 1. Even Flow In Processing
- 2. Improve Film Structure
- 3. Improve Dimensional Stability
- 4. Better Heat Resistant
- 5. Increase Machine Output By +25% - 30%
Applications:
- Non Woven
- Lamination
PLAST FAB 780
Features:
- 1. Even Flow In Processing
- 2. Improve Film Structure
- 3. Improve Dimensional Stability
- 4. Better Heat Resistant
- 5. Increase Machine Output By +25% - 30%
Applications:
- Non Woven
- Lamination
PLAST FAB 780 CK
Features:
- 1. Even Flow In Processing
- 2. Improve Film Structure
- 3. Improve Dimensional Stability
- 4. Better Heat Resistant
- 5. Increase Machine Output By +25% - 30%
Applications:
- Non Woven
- Lamination
PLAST FAB 783
Features:
- 1. Even Flow In Processing
- 2. Improve Film Structure
- 3. Improve Dimensional Stability
- 4. Better Heat Resistant
- 5. Increase Machine Output By +25% - 30%
Applications:
- Non Woven
- Lamination
PP BASE FILLER
PLAST MODIFIER
PLAST MODIFIER (PP) is a Performance enhancing product scientifically known as compounds comprising of mineral filler , elastomers and additives at right proportions engineered to meet stringent end-use applications.
Plast Modifier improves whiteness and gloss and increases processability.
Plast Modifier improves whiteness and gloss and increases processability.
Types of PLAST MODIFIER
PLAST MODIFIER PP
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Increase Elongation
- 4. Minimize formulation costs while enhancing end-product performance
- 5. Less tape breakage with higher filler loading
- 6. Faster line speeds and improved output
Applications:
- Non Woven
- Woven Sack
PLAST MODIFIER GP
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Increase Elongation
- 4. Minimize formulation costs while enhancing end-product performance
- 5. Less tape breakage with higher filler loading
- 6. Faster line speeds and improved output
Applications:
- Carry Bag
PLAST MODIFIER WHITNER
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Increase Elongation
- 4. Minimize formulation costs while enhancing end-product performance
- 5. Less tape breakage with higher filler loading
- 6. Faster line speeds and improved output
Applications:
- Woven Sack
PLAST MODIFIER LL 783
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Increase Elongation
- 4. Minimize formulation costs while enhancing end-product performance
- 5. Less tape breakage with higher filler loading
- 6. Faster line speeds and improved output
Applications:
- Woven Sack
PLAST MODIFIER LL 801
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Increase Elongation
- 4. Minimize formulation costs while enhancing end-product performance
- 5. Less tape breakage with higher filler loading
- 6. Faster line speeds and improved output
Applications:
- Woven Sack
PLAST MODIFIER LL 901
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Increase Elongation
- 4. Minimize formulation costs while enhancing end-product performance
- 5. Less tape breakage with higher filler loading
- 6. Faster line speeds and improved output
Applications:
- Lamination
PE Base Filler
PE BASE FILLER
PLAST FILL
PLAST FILL masterbatch is a special masterbatch is designed for blown film, carry bag , mulch film , multilayer , packaging film products to impan dimentional
stability and to reduce cost. the special caco3 is used with carrier resin and additives to imapart flexibility and improve imaprt strength . pre- heating of plast fill gives more improved resuts . loading of this product is depends
on machine and climate condition.
PLAST FILL Fillers are a perfect blend of ultra fine particle size , coated CaCO3 powder with Virgin Polyethylene & performance additives at right proportions customized based on the end applications.
PLAST FILL Fillers are a perfect blend of ultra fine particle size , coated CaCO3 powder with Virgin Polyethylene & performance additives at right proportions customized based on the end applications.
Types of PLAST FILL
PLAST FILL 777
Features:
- 1. consistent result
- 2. improve dimentional stability
- 3. improve impact strength.
- 4. improve flexiblility
- 5. less powder formation
Applications:
- Carry Bag
- Linear
- Multilayer
PLAST FILL 780
Features:
- 1. consistent result
- 2. improve dimentional stability
- 3. improve impact strength.
- 4. improve flexiblility
- 5. less powder formation
Applications:
- Carry Bag
- Linear
- Multilayer
PLAST FILL 783
Features:
- 1. consistent result
- 2. improve dimentional stability
- 3. improve impact strength.
- 4. improve flexiblility
- 5. less powder formation
Applications:
- Carry Bag
- Linear
PLAST FILL 783 LLL
Features:
- 1. consistent result
- 2. improve dimentional stability
- 3. improve impact strength.
- 4. improve flexiblility
- 5. less powder formation
Applications:
- Carry Bag
- Linear
PE BASE FILLER
PLAST WHITE
PLAST WHITE Fillers are a perfect blend of ultra fine particle size , coated CaCO3 powder with Virgin Polyethylene & performance additives at right proportions customized based on the end applications.
Plast White a universal grade. It improves printability and out. It is also useful for enhancing processability and saving the process & production cost.
Plast White a universal grade. It improves printability and out. It is also useful for enhancing processability and saving the process & production cost.
Types of PLAST WHITE
PLAST WHITE 778 PRM
Features:
- 1. Excellent anti-fibrillation
- 2. Improve denier control of tapes
- 3. Improve Anti- slip property
- 4. Improve tenacity of tapes
- 5. Improve film stability even at high speed
Applications:
- Lamination
- Woven Sack
PLAST WHITE 780
Features:
- 1. Excellent anti-fibrillation
- 2. Improve denier control of tapes
- 3. Improve Anti- slip property
- 4. Improve tenacity of tapes
- 5. Improve film stability even at high speed
Applications:
- Lamination
- Carry Bag
- Woven Sack
PLAST WHITE 783
Features:
- 1. Excellent anti-fibrillation
- 2. Improve denier control of tapes
- 3. Improve Anti- slip property
- 4. Improve tenacity of tapes
- 5. Improve film stability even at high speed
Applications:
- Lamination
- Carry Bag
- Woven Sack
PLAST WHITE SL
Features:
- 1. Excellent anti-fibrillation
- 2. Improve denier control of tapes
- 3. Improve Anti- slip property
- 4. Improve tenacity of tapes
- 5. Improve film stability even at high speed
Applications:
- Carry Bag
- Liner
PE BASE FILLER
PLAST MODIFIER (LL)
PLAST MODIFIER (LL) is a Performance enhancing product scientifically known as compounds comprising of mineral filler , elastomers and additives at right proportions engineered to meet stringent end-use applications.
Plast Modifier improves whiteness and gloss and increases processability.
Plast Modifier improves whiteness and gloss and increases processability.
Types of PLAST MODIFIER (LL)
PLAST MODIFIER PP
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Minimize formulation costs while enhancing end-product performance
- 4. Less tape breakage with higher filler loading
- 5. Faster line speeds and improved output
Applications:
- Non Woven
- Woven Sack
PLAST MODIFIER GP
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Minimize formulation costs while enhancing end-product performance
- 4. Less tape breakage with higher filler loading
- 5. Faster line speeds and improved output
Applications:
- Carry Bag
PLAST MODIFIER WHITNER
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Minimize formulation costs while enhancing end-product performance
- 4. Less tape breakage with higher filler loading
- 5. Faster line speeds and improved output
Applications:
- Woven Sack
PLAST MODIFIER LL 783
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Minimize formulation costs while enhancing end-product performance
- 4. Less tape breakage with higher filler loading
- 5. Faster line speeds and improved output
Applications:
- Woven Sack
PLAST MODIFIER LL 801
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Minimize formulation costs while enhancing end-product performance
- 4. Less tape breakage with higher filler loading
- 5. Faster line speeds and improved output
Applications:
- Woven Sack
PLAST MODIFIER LL 901
Features:
- 1. Improves Whiteness
- 2. Excellent Gloss, Shine & Luster
- 3. Minimize formulation costs while enhancing end-product performance
- 4. Less tape breakage with higher filler loading
- 5. Faster line speeds and improved output
Applications:
- Lamination
HDPE Base Filler
HDPE BASE FILLER
PLAST HIGH MIX
PLAST HIGH MIX Fillers are a perfect blend of ultra fine particle size , coated CaCO3 powder with Virgin High Density Polyethylene & performance additives at right proportions customized based on the end applications. Our feedstock raw materials are imported from well renowned sources being used worldwide with consistent product quality and best in class service standards always.
Types of PLAST HIGH MIX
PLAST HIGHMIX PRM
Features:
- Multilayer Blown films Plants are running smoothly
- Low Rejection and cost saving
- Even Flow in processing by maintaining uniform back pressure
- Reduce Shrinkage of film Blow and Injection Moulded Articles
- Improve gloss, Opacity and surface finish
- Improves End Products structure & Printability
- Improves adhesive lamination in Multilayer film Based on of Premium Valuable Additives
Applications:
- Carry Bag
- Liner
- Blow Moulding
PLAST HIGHMIX SUPER
Features:
- Multilayer Blown films Plants are running smoothly
- Low Rejection and cost saving
- Even Flow in processing by maintaining uniform back pressure
- Reduce Shrinkage of film Blow and Injection Moulded Articles
- Improve gloss, Opacity and surface finish
- Improves End Products structure & Printability
- Improves adhesive lamination in Multilayer film Based on of Premium Valuable Additives
Applications:
- Carry Bag
- Liner
- Blow Moulding
Talc Base Filler
TALC BASE FILLER
PLAST CLEAR
PLAST CLEAR is a talc base transparent filler masterbatch . it is a perfect blend of ultra fine particle size inorganic transparent powder Ba SO4 with Virgin Polyethylene & performance additives at right proportions customized based on the end applications.
Plast Clear acts as nucleating agent and it enhances printing & stiffness. lt also retains the transparency of the finished product.
It increases mechanical properties in highly filled compound. It is mainly used for transparent application. It reduces your processing and product cost.
Plast Clear acts as nucleating agent and it enhances printing & stiffness. lt also retains the transparency of the finished product.
It increases mechanical properties in highly filled compound. It is mainly used for transparent application. It reduces your processing and product cost.
Types of PLAST CLEAR
PLAST CLEAR
Features:
- 1. Retains transparency in finished products while improving properties
- 2. Even flow in processing by maintaining uniform back pressure
- 3. Reduce post shrinkage of film
- 4. Improve Film structure with anti black property
- 5. Improves adhesive lamination in multilayer film
- 6. Increase machine output
Applications:
- Lamination
- Woven Sack
- Carry Bag
PLAST CLEAR FILM
Features:
- 1. Retains transparency in finished products while improving properties
- 2. Even flow in processing by maintaining uniform back pressure
- 3. Reduce post shrinkage of film
- 4. Improve Film structure with anti black property
- 5. Improves adhesive lamination in multilayer film
- 6. Increase machine output
Applications:
- Carry Bag
PLAST CLEAR MODIFIER
Features:
- 1. Retains transparency in finished products while improving properties
- 2. Even flow in processing by maintaining uniform back pressure
- 3. Reduce post shrinkage of film
- 4. Improve Film structure with anti black property
- 5. Improves adhesive lamination in multilayer film
- 6. Increase machine output
Applications:
- Lamination
- Woven Sack
PLAST CLEAR HIGHMIX
Features:
- 1. Retains transparency in finished products while improving properties
- 2. Even flow in processing by maintaining uniform back pressure
- 3. Reduce post shrinkage of film
- 4. Improve Film structure with anti black property
- 5. Improves adhesive lamination in multilayer film
- 6. Increase machine output
Applications:
- Blow Moulding
- Carry Bag
WHY BAJAJ FILLERS ?
Almost all plastics are made from petroleum feedstock & the price of plastics inexorably increases whenever abundance of oil and gas declines. In contrast, our BAJAJ FILLERS are available at any given point of time throughout the year and our prices climb at a much slower pace, with the consequence that filled plastics become more commercially attractive year after year. The same resins are available to all but by using our fillers , one can craft formulations that outperform and get a cutting edge in the market in spite of fierce competition with so many suppliers.
Filler Masterbatch for HDPE/PP, Woven Sack, Films and Sheet Extrusion
Filler Masterbatch for HDPE/PP Coating (Lamination) Applications
Choose your product
Heat Stability
Light fastness
UV Stability
Environmental Stability
Food Contact Application
Heat Stability
Light fastness
UV Stability
Environmental Stability
Food Contact Application
Heat Stability
Light fastness
UV Stability
Environmental Stability
Food Contact Application
Heat Stability
Light fastness
UV Stability
Environmental Stability
Food Contact Application
Applications of Mineral Filled Masterbatch
Filler Masterbatch For
Injection Moulding Applications
| Type | Description |
|---|---|
| Plast Stiff | Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost. |
| Plast White | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast Fab | "Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost." |
Filler Masterbatch For
Blow Moulding Applications
| Type | Description |
|---|---|
| Plast White | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast Whitener | "Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost." |
Filler Masterbatch For
Pale Container Applications
| Type | Description |
|---|---|
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast Whitener | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Fab | "Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost." |
Filler Masterbatch For
Carry Bag Applications
| Type | Description |
|---|---|
| Plast Fill | "Cost Saving Of Polymer,Better Productivity,(10 % Of Plastfil Increases 10% Of Output)Less Machine Wear &Tear,Energy Saving ,Less Wastage,Lower Totalcost" |
| Plast White SL | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Modifier GP | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast High Mix | "Cost Saving Of Polymer (10% Of Plast Highmix Increases 10% Of Output ),Better Productivity,Less Machine Wear & Tear,Energy " |
| Plast White | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
Filler Masterbatch For
PE Film
| Type | Description |
|---|---|
| Plast Fill | "Cost Saving Of Polymer,Better Productivity,(10 % Of Plastfil Increases 10% Of Output)Less Machine Wear &Tear,Energy Saving ,Less Wastage,Lower Totalcost" |
| Plast White SL | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Modifier GP | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast High Mix | "Cost Saving Of Polymer (10% Of Plast Highmix Increases 10% Of Output ),Better Productivity,Less Machine Wear & Tear,Energy " |
| Plast White | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
Filler Masterbatch For
Multi Layer Film
| Type | Description |
|---|---|
| Plast Fill | "Cost Saving Of Polymer,Better Productivity,(10 % Of Plastfil Increases 10% Of Output)Less Machine Wear &Tear,Energy Saving ,Less Wastage,Lower Totalcost" |
| Plast White SL | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Modifier GP | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast White | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
Filler Masterbatch For
Woven Sack Application
| Type | Description |
|---|---|
| Plast Stiff | Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost. |
| Plast White | "Cost Saving Of Polymer, Increases Output, Better Productivity, Less Machine Wear & Tear, Energy Saving, Less Wastage, Lower Total Cost" |
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
| Plast Whitner | "Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost." |
Filler Masterbatch For
FIBC Bag Application
| Type | Description |
|---|---|
| Plast Stiff | Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost. |
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
Filler Masterbatch For
AD-Star Bag Application
| Type | Description |
|---|---|
| Plast Stiff | Cost Saving Of Polymer,Better Productivity,Less Machine Wear & Tear,Energy Saving ,Less Wastage,Lower Total Cost. |
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |
Filler Masterbatch For
PIPE Application
| Type | Description |
|---|---|
| Plast High Mix | Cost Saving Of Polymer (10% Of Plast Highmix Increases 10% Of Output ),Better Productivity,Less Machine Wear & Tear,Energy |
| Plast Modifier | It Increases Mechanical Properties In Highly Filled Mineral And Recycled Polyolefins Specially Made For Woven Fabric/Sack, Jumbo Bags |